TARDIS
You cannot see attachments on this board.
This is my interpretation of the TARDIS console design.
SeanClarke1 03/04/2004

---

view1
You cannot see attachments on this board.
SeanClarke1 05/04/2004

---

view2
You cannot see attachments on this board.
SeanClarke1 05/04/2004

---

bracket
You cannot see attachments on this board.
SeanClarke1 05/04/2004

---

confix
You cannot see attachments on this board.
The two types of plastic fixing blocks purchased from B&Q. The type with the
nut and bolt arrangement is shown connected together and seperated.
SeanClarke1 14/08/2004

---

confixv
You cannot see attachments on this board.
Plastic blocks used to support part of MAIN DIAMETER section.
SeanClarke1 14/08/2004

---

const
You cannot see attachments on this board.
Plastic blocks with nut and bolt arrangement used to connect upright
components between CROWN and BASE.
SeanClarke1 14/08/2004

---

Time Rotor Mechanism (unsuccessful)
You cannot see attachments on this board.
Here is the mechanism to make my time rotor rise and fall (which doe not work
with column in place). Having enough space for the counter balance is the
main problem. I am considering using springs instead of free masses. Don't
even ask about motor gearing.
SeanClarke1 06/02/2005

---

There is an associated thread here: Old News Console, and also here: Tenth Anniversary Console.